The AoN implant lines have been designed to convey feeling and naturalness to the user, offering stability, flexibility and a complete prosthetic portfolio, capable of satisfying every technical need. All this to ensure excellent clinical performance and predictable and aesthetic results that satisfy patients to the maximum.
REVCON uses a Morse Cone connection with a terminal hexagon for positioning, which translates into absolute stability and the absence of micro-movements. To simplify prosthetic management and allow intervention in the event of tissue conditioning avoiding peri-implantitis problems, we have designed a simple and safe system for removing the abutment.
Thanks to its morphology, it adapts well to surgery of the upper jaw. The extremely sharp apical part makes it very performing in post-extraction sites, where it allows stabilizing the implant even in a few millimeters of bone.
UNIQUE PLATFORM:
The same prosthetic platform for
all diameters facilitates the
operator’s work by simplifying the
management & provides
maximum flexibility to the system.
PLATFORM SWITCHING
The converging tapering of the
coronal part encourages bone
retention by providing a constant
aesthetic of the gingival contour
by stabilizing the soft tissues.
PROGRESSIVE THREAD:
The thread has a progressive
apical-coronal trend that
during the screwing phase
generates a horizontal
compaction of the medullary
bone, improving primary
stability (ideal for D3-D4 bone).
PROFILE:
The truncated conical profile
offers significant advantages in
many critical situations.
APEX SLOTS:
They make the implant self-
drilling which contributes to the
recovery of bone fragments mixed
with blood and medullary bone
growth factors.
MILLING THREAD APEX:
It gives the implant self-tapping
and self-drilling capabilities.
UNIQUE PLATFORM:
The same prosthetic platform for
all diameters facilitates the
operator’s work by simplifying the
management & provides
maximum flexibility to the
system.
PLATFORM SWITCHING:
The converging tapering of the
coronal part encourages bone
retention by providing a constant
aesthetic of the gingival contour
by stabilizing the soft tissues.
BONE PLATFORM SWITCHING:
The particular morphology of
the neck allows to increase the
contact surface with the bone
and to preserve a greater
portion of the periosteum. The
conical coronal part allows less
traumatic contact with reduced
pressure on the cortical crestal
avoiding dangerous
compressions on blood vessels.
CONICAL TOP
The extremely conical apical part
makes underprepared sites in the
softer bone possible.
APEX MILLINGS:
They make the implant self-
tapping and they contribute to
creating primary stability.
PROFILE
The self-tapping parallel wall
profile is very versatile and
particularly suitable for dense
bone.
The OsTiOx™ surface is obtained by a double acidification process. This type of treatment provides the characteristic micro-topography found on the implant surfaces according to the modern conception.
The surface roughness, with micro-pits separated by distances in the order of the micrometer (μm), makes it extremely efficient for activating platelet aggregation and clot retention at the implant site.
The capillary structure of this surface acts as a sponge that benefits the internal growth of the tissue and guarantees a fast and favorable bone healing process.
Every organism subject to trauma is repaired according to different physiological modalities. If we examine the bone, three healing modes are recognized: primary, secondary, and tertiary. Each of the above is activated under different conditions. The most immediate is to be considered as primary, i.e., any composite fracture or bone injury.
This healing takes place in 6 to 8 weeks under normal conditions. In order to achieve swift implant integration, it is necessary to aim for primary healing after positioning. To obtain this type of healing, a swift and minimally invasive approach is necessary, do not open the mucoperiosteal flaps to their entire thickness, do not heat the recipient tissues above 132.8° F, never compress the bone during the installation of the implant prosthesis and do not irrigate the alveoli during surgery.
The correct application of the techniques allows the implant prostheses to be loaded instantaneously or within around 45 days, with evident advantages for the safety and success of the implant prosthesis treatment.
Note: “Looking at McKibbin and Shenk’s studies on bone healing and after carefully examining all the scientific articles produced by Dr. G. Vrespa, in collaboration with the University of Chieti since the 90s, we believe we can combine this hard tissue healing method with our implants.”
Over the years, Marginal Bone Loss has been used as a criterion for the assessment of perimplantary tissues, intended as the bone resorption around the implant. In recent years, attention has no longer been focused solely on this element as a reference benchmark, and increasing attention has been given to soft tissues, seen as a protective barrier for the bone.
It is now perceived that Marginal Bone Loss is influenced by several factors, including: Surgical, Biological, Implants.
Surgical
Factors resulting from an incorrect surgical approach, such as the flap, heat, pressure and torque, may be critical elements in causing the bone matrix to recede from the implant collar.
Biological
At a biological level, non-compliance with the principles that regulate biological amplitude may lead to the same effects on bone. Failure to respect the spaces that our body needs to create the mucosal seal involves bone remodeling below the soft tissues, which causes exposure of the coronal part of the implant.
Implants
The implant element must have a high-performing connection, both at a mechanical level (absence of micro gaps) and at the bacterial seal level. Over the years our Morse Cone connection has been rated as gold standard. Other important aspects are the platform switching, the separation of the connection from the bone, combined with narrower and longer prosthetic abutment protrusions, leaving more room for the soft tissues. The correct combination of the aforementioned points obliges the implantologist to refine his prosthetic vision and to change his purely clinical approach into a prosthetic-guided approach. Implant positioning at a bone level is no longer sufficient, it is necessary the knowledge of the soft tissues, their requirements and, consequently, modify the implant positioning according to the correct biological spaces to ensure appropriate maintenance.
Every organism subject to trauma is repaired according to different physiological modalities. If we examine the bone, three healing modes are recognized: primary, secondary, and tertiary. Each of the above is activated under different conditions. The most immediate is to be considered as primary, i.e., any composite fracture or bone injury.
This healing takes place in 6 to 8 weeks under normal conditions. In order to achieve swift implant integration, it is necessary to aim for primary healing after positioning. To obtain this type of healing, a swift and minimally invasive approach is necessary, do not open the mucoperiosteal flaps to their entire thickness, do not heat the recipient tissues above 132.8° F, never compress the bone during the installation of the implant prosthesis and do not irrigate the alveoli during surgery.
The correct application of the techniques allows the implant prostheses to be loaded instantaneously or within around 45 days, with evident advantages for the safety and success of the implant prosthesis treatment.
It is now well-established practice to carry out prosthetic design and planning before facing an implant surgery.
Today, in fact, there are very valid planning tools that give the clinician all the useful information to face any type of rehabilitation. To support the technology, adequate prosthetic components are needed to facilitate its best execution, with profiles that respect and promote the stabilization of the biological width.
The range of components must allow the clinician to use all finalization protocols, guaranteeing maximum results.
REVCON is the most advanced prosthetic system in the AoN Implants range, it allows the use of a wide range of prosthetic solutions: cemented, screwed, conometric, combined, and overdenture. REVCON allows the surgeon to meet the needs of the most demanding patients by moving from protocols with deferred loading to “one implant one abutment” techniques thanks to the KiSS (Keep it Simple System) prosthetic abutments or the help of the 1to1 connector.
To operate on the REVCON connection and be able to benefit from its peculiarities to the fullest, the system adopts two special prosthetic keys called IN and OUT which allow you to activate and deactivate the REVCON conometry.
To obtain the best performance from a Morse Cone Connection, it is necessary to activate the coupling of the abutment on the implant by applying a screwing force of 30/35 Ncm. The tool dedicated to this action is the IN key. The IN key activates REVCON axially without stressing the coronal area of the implant.
After having coupled the components, the IN key is removed and the passing screw is subsequently positioned, tightening it to 25 Ncm, which only acts as an elastic connecting element.
The OUT key is used to extract the abutment from the implant. Before using this key, it is necessary to remove the through passing screw in order to free the hole. Then you insert OUT key in the hole of the abutment and proceed by screwing the key until the conometry is released, at this point it is possible to remove the abutment.
Immediate load rehabilitation, with the aim of resuming normal life with aesthetics and comfort, is increasingly requested by patients. For this reason, professional firms are increasingly organized in order to compete in an increasingly aggressive market.
AoN Implants offers different techniques where a “one implant one abutment” protocol is envisaged. One of these is the KiSS systematics. Thanks to these components, the clinician is able to offer the patient a functional rehabilitation in a short time, with excellent aesthetic results. KiSS provides the dentist with a series of prosthetic abutments to be placed directly after bone surgery, which are coupled with special conometric caps, on which the patient’s prosthesis is relined.
With this system, prosthetic screws can be eliminated and the use of cements in contact with soft tissues can be minimized, offering the clinician and the patient a simple and clean management of the product.
The 1to1 connector has been designed to simplify prosthetic management for the clinician, by converting the REVCON connection into an external hexagon connection near the gingival margin.
1to1 combines key features & benefits generated by Morse Cone connection at the bone level with the simplicity of managing an external hexagon connection at the prosthetic level. The stabilization of the soft tissues therefore takes place at the connector, which is always positioned using a “one implant one abutment” protocol.
This technique, together with many other proposals from AoN Implants, simplifies the clinical work and increases the range of possibilities offered to patients.
REVCON is an exclusive connection of AoN Implants, born from the idea of creating a system that takes its cue from the history of implantology and re-elaborates its fundamental concepts, making them current and usable for implantologists and prosthetists of the new millennium. The result of a development that lasted 2 years, REVCON collects an extremely wide and exclusive range of prosthetic solutions.
The implant lines adopt surgical protocols and instruments suitable for the THC (Tissue Healing Concept) technique, this means that tissue healing will always be the fastest and most efficient.
The manufacturing, control, cleaning, decontamination, and sterility standards of the product have also met the strict standards of the Food and Drug Administration (FDA) making this product suitable for commercialization in the North American market.
REVCON is a developed project which is growing together with the clinicians of the REVCON Academy.
For this reason, we have made available the possibility of meeting you directly with colleagues who use the system on a daily basis, together with an AoN Product Specialist, to give you the opportunity to discover the properties of the product, all the clinical applications and the benefits it will bring to your work.
You will also be able to view the Clinical Cases carried out on patients and the extraordinary properties of the adopted systems.
Book now a free video consultation or a call.
We will immediately process your request.
Get the dental technical catalog in the download section.
There you will discover all the technical details, the sizes of the available implants, the prosthetic components and the compact surgical kit, all designed to offer maximum performance!
Monday to Friday
9:00 am to 5:00 pm